MLO Architecture – Information Elements

The section that deals with Multi-Link Operation in the standard is section 9.4.2.322 (802.11be-2024). The Multi Link Operation element and the basic MLO element creation are provided in this article. The idea is to let the reader understand how the Information Element is derived and what it signifies for the basic MLO operation.

Figure Courtesy: Extracted from 802.11be-2024 standard

The common Information field contains information that is common to all links in the MLD. The common information field is provided below.

Figure Courtesy: Extracted from the 802.11be-2024 standard

The creation of the basic MLO element, which is determined by the Type field (set to 0) in the table which is shown above is provided in the image below based on presence bit and how the element changes based on the presence bitfield. MLO element type are as described in the standard in section 9.4.2.322 (802.11be-2024). The interested reader can look through the standard for the other MLO element types.

Figure Courtesy: Extracted from the 802.11be-2024 standard

In the next article, we will look at why MLO was considered by the standard’s body and how an AP to station connection for an MLO connection on different links is negotiated

Why MLO and MLO Link Establishment

Comments

  1. Pingback: MLO Architecture and Features | Hitch Hiker's Guide to Learning

Leave a Reply

Your email address will not be published. Required fields are marked *